Glass flake clay 1.1 clay is lined with glass flake vinyl ester resin primer, clay surface coatings (imported material, thickness 4 mm). Construction process: remove the coating and curing the concrete surface of the original product loose; vinyl ester resin primer primer 1 to 2; Scratch vinyl ester resin clay layer 2; vinyl ester resin topcoat 1-2 Road; conservation cure. 1.2 Imported brick panels lining corrosion using German or Canadian import series primer, clay, brick panels (brick thickness 38 mm). Construction process: the removal of the existing concrete surface coating and curing osteoporosis product; even brushing primer; conducted according to the provisions of clay mix formulated; brick panels lining. When masonry brick panels on the flat, brick panels are arranged generally laterally continuous seam, longitudinal seam wrong. When masonry brick panels, each paved one, should be paved with brick panels withstand another line to prevent sliding, until slightly dry clay, were paved next line. At the bottom of the lining is complete, after the clay early condensation may begin lining the facade. When lining the facade should be carried out under upward pressure would be generated when the lower brick panels lining the upper brick panels, the lower layer Qi Hao but uncured clay brick lamellar misplaced or moved. Therefore, when the facade is not a continuous lining multilayered lining, usually in 2 to 3 layers of continuous lining after pause a moment, and then continue to be the initial setting of the underlying clay lining; conservation cure.