Supply of glass flake epoxy glass flake paint clay, glass flake clay 1.1 clay is lined with glass flake vinyl ester resin primer, clay surface coating (imported materials, thickness 4 mm). Construction process: removing the coating and curing the concrete surface of the original product loose; vinyl ester resin primer primer 1 to 2; Scratch vinyl ester resin clay layer 2; vinyl ester resin topcoat 1-2 Road; conservation cure. 1.2 brick panels lining corrosion using imported German or Canadian imports series of bottom paint, clay, brick panels (brick thickness 38 mm). Construction process: the removal of the existing concrete surface coating and curing osteoporosis product; even brushing primer; conducted according to the provisions of clay mix formulated; brick panels lining. Masonry brick panels on the flat, brick panels arranged in generally laterally continuous seam, longitudinal seam wrong. When the brick masonry panels, each paved piece should be paved with brick panels withstand another line to prevent slippage, until slightly dry clay, were paving the next line. At the bottom of the lining is completed, after the initial condensation clay, you can begin lining the facade. When lining the facade, should be carried out under upward pressure would be generated when the lower brick panels lining the upper brick panels, so the lower Qi Hao but uncured clay brick lamellar misplaced or moved. Therefore, when the facade is not a continuous lining multilayered lining, usually in 2 to 3 layers of continuous lining after pause a moment, and then continue until the initial setting of the lower clay lining; conservation cure. 1.3 overall surface corrosion using primer liquid, high temperature corrosion special materials, surface coating liquid (coating thickness 3 mm). Construction process: the eradication of the original loose concrete surface coating of sulfide into the concrete places where blowtorch baking, it crystallized, then wash with water, to clean the surface of the concrete base; the surface treated in primary uniform coating material on the back cover; back cover material until after curing, repair materials with uneven patches depression at the grassroots; for repair at a uniform spray material back again, for the construction of the whole surface after curing; require surface smooth, clean, to meet the design of corrosion layer thickness; on the whole surface layer anticorrosion coating and then topcoat 2. 2 chimney preservative system compares 2.1 preservative system performance three kinds of chimney corrosion system performance comparison.