- Product Categories
- Glass flake clay
- Glass flake vinyl clay
- Desulfurization tower corro..
- Glass Flake Coating
- NC beads machine
- Friendly Links
Information Name: | Glass flake anti-corrosion material corrosion coatings |
Published: | 2015-01-10 |
Validity: | 2 |
Specifications: | Custom made |
Quantity: | 1000.00 |
Price Description: | |
Detailed Product Description: | Glass flake clay (Coating) flake coating is thick slurry coating resin and the corrosion scales aggregate composition, flake paint resins include: epoxy resin, urethane resin, unsaturated polyester resin, and the like. Phenolic epoxy ester resin which provides excellent resistance to acid and alkali and high temperature (205 ℃) properties of the medium. In addition to glass flake paint flake flake, there are stainless steel scales, zinc and aluminum flake graphite flake, micaceous iron oxide scales, etc., have good barrier properties, and each with distinct characteristics. Glass flake because of its good chemical resistance, cold resistance, heat resistance, more and more used in the chimney anti-corrosion coatings. I. INTRODUCTION glass flake corrosion construction method of glass flake resin anticorrosive material mainly from scattered discontinuous glass flake and viscous resin, through special equipment like a mixture of clay composites. So it's construction work by the builder with the trowel, knives and other tools gray certain thickness requirements apply to be surface protection, in addition to bubble after bubble removal roll, compaction, calendering, and in a certain direction so that the glass flake off pressure After curing the arrangement, which is similar to building construction work plastering job. Tam due to the different characteristics of the resin and cement materials, application purpose is also different, so the smear job again higher than plastering harder requirements. Second, the main features of the construction of a glass flake resin corrosion jobs for manual operation, it is the quality of construction, construction depends largely on the level of those skills and proficiency. 2, the surface quality of the coating, the glass flake alignment state, thickness control, rely mainly on the level of experience of the builder and construction technology. 3, glass flake coating must be completely closed. End face, connecting surface and the corner, in order to prevent damage and stress concentration is not parallel arrangement of scales and other defects, should be taken, such as glass cloth reinforced compensation measures. 4, the construction should be equipped with special equipment to minimize mixing ingredients bubble formation. 5, glass flake resin corrosion harsh construction environment, is a flammable hazardous jobs. Coupled with the complexities of the construction site, so the construction of the security is very important. |
Admin>>>
You are the 16354 visitor
Copyright © GuangDong ICP No. 10089450, Langfang four-star corrosion Material Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 16354 visitor
Copyright © GuangDong ICP No. 10089450, Langfang four-star corrosion Material Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility