Desulfurization tower tank corrosion glass flake paint a square meter to confirm how much the cost of a pre-construction matters: (1) high humidity or when you must use a dehumidifier dehumidifier condensation. (2) After brushing primer to confirm whether there is pink lining the surface layer or other foreign matter, such as attachment. If so, must be removed. 1.2.2 reconcile lining material (1) preparation of the ratio: Paint: initiator: accelerator = 100: 1.0: 0.5 (weight ratio) (or adjust according to climatic conditions) (2) to reconcile after sufficient stirring with a hand mixer . 1.2.3 lining construction essentials (1) using mud trowel and roller construction, to ensure that the average thickness and the expected requirements. (2) treatment with less roll dipped coated styrene gently rolling scales, trimming surface. (3) ensure that each wipe average wet film coating thickness control at 0.4-0.5 centimeters. 1.3 The first intermediate layer grassroots flake lining 1.3.1 visual inspection visual inspection, check to make sure no bubbling finger touch, injuries, signs of sagging, uneven, poor hardening and other defects. 1.3.2 The thickness of the check using a magnet or electromagnetic thickness gauge measuring a press 2m2 confirm lining thickness. 1.3.3 handling of failed at (1) the thickness of the shortcomings of the need to make up the thickness. (2) the protrusions, surface scars, sagging marks, bubbles in the premise of ensuring the thickness of polished with grinder. 1.4 The second layer grassroots flake lining construction (similar to those of the first layer) and so on, to ensure that the average per coat wet film thickness control at about 0.4-0.4 mm. 1.5 Construction 1.5.1 Surface checklist before construction (1) You must use a dehumidifier dehumidifier when high humidity or condensation; (2) to confirm the former Road grassroots scales hardened state.