Luoyang desulfurization tower of glass flake anticorrosive epoxy glass flake clay is dispersed discontinuous glass flakes, sticky resin and related functional filler mixing equipment made by clay-like composite materials, mainly used in smoke absorber system, Net tobacco smoke Road; flue system's original tobacco smoke Road, waste incineration flue and high temperature, with a variety of chemical oxidation of media; electrolyzer, a variety of chemical equipment, water treatment systems, oil storage tanks, marine engineering, building, floor; and other media. Such as storage tanks, water treatment systems, urea granulation tower, concrete, construction and other industries. Corrosion and structural principle: the principle of corrosion - labyrinth effect glass flake. This shielding effect under severe conditions of use to reduce the formation of air bubbles. Since the glass flake lamellar configuration, coupled with the scale, the barrier effect of a complexing agent, and therefore can play a reduced hardening due to shrinkage and expansion coefficient of plane direction and to improve adhesion, to prevent cracks, separation and the role of these important effects are by nature and close integration of resin produced. ? Vinyl glass flake clay Features: 1, has a unique anti-infiltration barrier, corrosive gas permeability is low; 2, good water ,, base, some solvents and some other special chemical media properties; 3, hardening shrinkage, adhesion to a variety of substrates and strong, easy local repair; 4, high toughness, good mechanical properties, temperature change adaptation; 51% crosslinking, high surface hardness, good abrasion resistance; 6 recommended that long-term use temperature: wet 140 ℃, dry 170-190 ℃. High temperature glass flake clay Applications: 1, lining steel, concrete construction under power plants, smelters, fertilizer plants and other flue gas relatively harsh environmental conditions (structures); (2) moderately corrosive liquid medium intensity following equipment , pipelines, storage tanks and external surface protection; 3, with fiberglass (FRP) composites with better results, such as for high-speed metal impeller; 4, power plants, refineries, chemical plants and other system, environment and equipment; 5, marine Facilities splash zone, gas, liquid, solid three-phase alternating harsh corrosive environments.